Cleaner - For Membrane Separation System - OLKLIN-DRO-2

OLKLIN-DRO-2

CLEANER

FOR MEMBRANE SEPARATION SYSTEM

Introduction:

OLKLIN-DRO-2 is a low pH liquid cleaner designed to remove metal foulants such as iron, manganese, and aluminium as well as calcium carbonate scale deposits from thin film composite membranes. OLKLIN-DRO-2 is buffered to prevent the pH limits of a membrane being exceeded in the event of misapplication.

Instructions for Use:

For moderate to severe fouling, OLKLIN-DRO-2 should be applied at a nominal strength of 2%w/v. For milder fouling, or where frequent cleaning is employed, satisfactory results may be achieved at 1% w/v.

The cleaning solution should be recirculated at the flow rate recommended by the membrane manufacturer, taking care not to exceed the guidelines for pressure.

Manhar Specialities recommend the following flow rates for cleaning spiral wound elements:-

Element Diameter	Flow rate
4" (100mm)	40 lpm
8" (200mm)	150 lpm

Temperature:

Where possible, apply the cleaning solution at the maximum temperature recommended by the membrane manufacturer.

Packaging:

OLKLIN-DRO-2 is available in 20kg carboys and 200kg drums. Other packaging is available on request.

Performance:

OLKLIN-DRO-2 offers a variety of performance benefits:

•    Compatible with the major membrane suppliers.
•    Superior results in the removal of metal foulants such as iron manganese & aluminium, especially when compared to generic formulations.
•   Contains a specialised blend of buffers, low foaming surfactants, chelants and other components to dissolve metal deposits.
•   Highly buffered to resist pH changes during the cleaning process.
•   Can be used in conjunction with other applicable cleaners.

Safety precautions:

Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).