Cleaning of cooling towers, boiler and closed circuit water systems is most usually accomplished while the water equipment is online and without the necessity of shut-down. In order to dissolve all water scale, lime, rust and dirt from the waterside of your equipment, it is imperative that these instructions are followed.
The product contains suitable blend of powerful de-scaling agents and specially designed corrosion inhibitors.
Property | OLKLIN-DSOL |
---|---|
State | Liquid |
pH | <2 |
Density | 1.03+/-.03 |
Color | Milky to yellow white |
Odor | Little irritating |
*Properties mentioned and colour shown here are for general idea of the product. Actual product property may vary depending on application.
When cleaning cooling towers and closed circuit coolers it is sometimes hard to determine the amount of scale build-up that has been accumulated over a period of time. It might be a case where you have a 500-ton cooling tower and you will need more than the recommended amount, which is
600 litres of OLKLIN-DSOL. The amounts on the Sizing Chart are just for the cooling tower and the closed circuit cooling only, not for the entire system, (pump piping and all the associated equipment that is using the cooling water). For the entire system, take the tonnage and multiply by 0.7, which equals the amount of OLKLIN-DSOL required to be used. If you need technical assistance or have any questions, please contact us.
Tonnage | Amount of OLKLIN-DSOL in litres |
---|---|
10 | 12.0 |
15 | 18.0 |
20 | 24.0 |
25 | 30.0 |
30 | 36.0 |
50 | 60.0 |
75 | 90.0 |
100 | 120.0 |
125 | 150.0 |
150 | 180.0 |
200 | 240.0 |
250 | 300.0 |
300 | 360.0 |
400 | 480.0 |
500 | 600.0 |
750 | 900.0 |
1000 | 1200.0 |
2000 | 2400.0 |
3000 | 3600.0 |
4000 | 4800.0 |
Store the product in a cool and dry place away from direct sunlight.
The product is available in 50 to 200 kg HDPE carboys.
Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).