Flocculant-anionic High Molecular Weight - POLYMAN-HMA-279

POLYMAN®-HMA-279

FLOCCULANT-ANIONIC HIGH MOLECULAR WEIGHT

POLYMAN-HMA-279 is a high molecular weight ANIONIC flocculants in granulated powder form. This product is designed to enhance liquid / solid separation in a wide variety of industrial applications like

•    Clarification, Settling.
•    Thickening, Concentrating.
•   Floatation.
•   Filtration.

These water soluble polymers works on bridging / bonding mechanism by their high chain length. They tie the fine colloidal particles and bind them together and form rapidly settling / separating bigger flocks, which are easily settled or separated from suspensions.

APPLICATION BENEFITS

•    Superior flock formation.
•    Major effects yielded with limited use.
•   Faster settling rate & clarification.
•   Use over broad pH.
•   Superior filtration & dewatering.
•   Combined use with organic co-agulant or cross treatment with cationic polymer gives superior treatment effects.
•   Removal of suspended solids, B.O.D., C.O.D., and phosphate in wastewater treatment plant.

SPECIFICATION

POLYMAN-HMA-279 is available in granulated free flowing powder in 25 Kg., H.D.P.E. polythene lined packing. The product has following specifications:-

Chemical Nature	Anionic water-soluble co-polymer of polyacrylamide
Appearance	Granulated free flowing powder
pH of 0.2 %	6.5 to 8.5 solutions in distilled water
Molecular weight	Very High
Solubility	Infinite solubility in water
Bulk Density	Water (0.5 to 0.8)

DISSOLVING POLYMAN-HMA-279

Laboratory

Fill 500 ml flask with 200 ml tap water and place it on a magnetic stirrer, accurately weigh out 1 gram sample of POLYMAN-HMA-279 and slowly sprinkle it into water while stirring vigorously without forming the lumps which takes too long to dissolve. It should be further illumed to 0.02% to 0.1% solid before application.

Plant Level

Add POLYMAN-HMA-279 to the water while it is being stirred; slowly add powder to prevent formation of lumps. You can use agitator or similar device to wet the powder in advance.

Once the POLYMAN-HMA-279 has been added, remaining water should be added before application to make dilution 0.02% to 0.1 %.

APPLICATION PROCEDURE

Care should be taken while addition of final diluted solution of POLYMAN-HMA-279. The general points to be observed are:-

•    Addition of product should be at the point of local turbulence.
•    Ensure homogeneous mixing of product throughout the complete substrate volume.
•   Addition of product should be as near as possible to the point where flocculation is required.
•   Excessive turbulence and possible flock breakdown after flock formation stage should be avoided.

SUGGESTED APPLICATION

•    Coagulant aid surface water clarification.
•    Wastewater treatment primary clarification.
•   Coagulant aid dissolved air floatation unit.
•   Steel rolling mill waste.
•   Rapid settling of precipitated heavy metal hydroxide like zinc, lead, copper, iron, cadmium, nickel, chrome hydroxide from waste in textile, metals finishing corrosion, protection, and other industries.
•   Dyes manufacturing units.
•   Coal washeries fine concentrate filtration and effluent.
•   Hot & cold lime softening plant.
•   Iron ore tailing water recovery.
•   Phosphate plant tailing water recovery.
•   Sugar juice clarification/filtration.
•   Brine purification in soda ash & caustic soda manufacturing.
•   Enhanced oil recovery for mobility control & polymer flooding.
•   Paper industry white & green water clarification.
•   Gypsum settling and filtration.
•   For floatation of oil in refinery waste water.
•   Phosphoric acid clarification.
•   Cement thickening in wet cement manufacturing process.
•   Clarification, thickening & dewatering of biological waste, waste from Aerobic & anaerobic, waste with or without primary coagulants like alum, ferric salt, lime, polyaluminum chloride etc.

STORAGE

Should be stored in cool dry place, except when in use. Packages should be kept closed to prevent entry of moisture. Under suitable condition of storage, this product will remain stable upto2 years.

SAFETY & HANDLING

Spills pose a hazard because they are extremely slippery.

TECHNICAL SERVICE

Our experienced team can provide advice and assistance in selection of the correct grade of product for particular application. Our team will assist you in conducting lab and plant level trial for optimum results.

This product is for industrial use only. The data submitted in this sheet are based on our current knowledge and experience this does not relieve from the responsibility of carrying out their own test and experiments neither do they imply any legal.