When water comes in contact with systems, corrosion of the metal, during and after contact, is a concern. OLKLIN-CIQUA-924 when added to water in small concentrations are able to prevent corrosion during wet storage. The corrosion inhibitor prevents corrosion even after vacating water from the system.
The mechanism of OLKLIN-CIQUA-924 corrosion inhibitor is to prevent corrosion of metals in three phases: within the solution, at the water line, and above the water line. It also prevents corrosion in the areas which are not reachable with other corrosion inhibitors.
The product is a combination of corrosion inhibitors, alkalinity builders, passivator, surface modifiers, chelating agents, oxygen scavenger and capable to protect various metals from corrosion even in the presence of relatively high concentrations of Chloride and Sulfate ions. The product is suitable to reach every corner of the part / system that requires protection from severe corrosive atmosphere.
Property | OLKLIN-CIQUA-924 |
---|---|
State | Liquid |
PH (1%) | 10- 12 |
Color | Yellow to dark yellow |
Odor | Not particular |
Solubility | Soluble in water |
*Properties mentioned and color shown in the photo above is for general idea of the product. Actual product property may vary.
Suitable for all Industrial machineries & Power plant.
Additionally the product is very suitable for the following:
Carbon steels, Mild steels, Stainless steels, Copper, Brass, Aluminium.
The product dose depends on quality of water and corrosive tendency of atmosphere also in some cases. But in general 10 to 1000 ppm is sufficient. More particularly, the dose may be 300- 500 ppm. The product may be dosed by a slug feed or by blending with the aqueous fluid as the system is being filled. One can dose the material continuously using metering pump also.
The pH of the aqueous system in which the product may be applied ranges from about 5 to about 12. The pH is preferably in the range from about 6 to about 10.
The dosage can be increased for more severe conditions.
Store in a sealed container in a dry warehouse, avoiding direct exposure to sunlight, with temperatures not exceeding 150°F (66°C). Under these conditions, shelf life is up to 24 months.
The product is available in 50 to 200kg HDPE carboys.
Before handling the product, refer material safety data sheet which contains detailed information about this product (available on request).