Multi-polymer containing acrylamide and acrylate.
|Water white to pale yellow liquid
|pH (10% solution)
|4.0 ± 0.5
|40.0 ± 2.0
|Stability of the deionised water solution (in days)
|Stability of the dry product (in months) @ 25°C
*Average values given as an indication. For the selection of preparation and dosing equipment, a viscosity 10 times lower can be used (Non Newtonian fluid).
This product is used in the following liquid-solid separation processes:
The above are some of the primary applications for this product. It may be beneficial in any liquid-solid separation process.
Stock solutions can be prepared up to 0.5% concentration via an automated make down unit or on a batch basis.
In laboratories, the stock solution can be prepared of 0.5% which will remain stable for 8-10 days but a use concentration of 0.1% solution must be used up in 1-4 days.
Solutions should be aged 30-60 minutes to achieve maximum effectiveness. High quality make up water should be used.
Secondary dilution water should be added to the stock solution prior to the addition point at a ratio of at least 10:1. Avoid using centrifugal pumps to transfer the polymer.
Flocculants are hygroscopic. Store in dry place at a temperature below 35°C.
Spillages should be cleaned up rapidly; surfaces will become very slippery if wetted.
55kg polyethylene carboys/220 kg polyethylene drums.
The information given herein is believed to be reliable. However, no guarantee is made or liability assumed. Manhar Specialities does not know of all of the uses to which its products may be utilized or the condition of use. Therefore, Manhar Specialities makes no warranty concerning the fitness or suitability of the product for a particular use or purpose.